Interface Setup
The PCR is equipped with RS232C interface as standard. If option interface boards are installed, you can use the GPIB, USB, and LAN interfaces.
The PCR is equipped with RS232C interface as standard. If option interface boards are installed, you can use the GPIB, and USB interfaces.
expanded function
By installing optional interface boards in the PCR-M series, you can expand its functions.
AC+DC mode, which enables you to superimposed an AC voltage with DC and generate the output, becomes selectable.
EXT-AC mode and EXT-DC mode, which enable you to control the output with an external analog signal, become selectable. (This is only available with the EX04-PCR-M analog interface board.)
The number of entries that you can store in memory increases from 3 to 10.
Setup
In the factory default settings, the remote control interface is set to the RS232C interface. The GPIB, RS232C, USB, and LAN interfaces cannot be used simultaneously.
AC Power Supply PCR-LE series