AC Power Supply PCR-LE series

AC Power Supply PCR-LE2 series

AC Power Supply PCR-M series

Commnunication Interface Mannual


 

Command (Function/ Subsystem)

IEEE488.2 Common Commands

*CLS Clears all the event registers
*ESE Sets the event status enable register bits
*ESR Queries the event status register
*IDN Queries the identification string (manufacturer information)
*OPC Causes the device to generate the operation complete message in the event status register when all pending selected device operations have been finished
*OPT Queries the hardware interface board that is installed
*PSC Initializes *ESE and *SRE
*RCL Recalls the contents saved to memory
*RST Performs a device reset; configures the PCR to a known condition independent from the usage history of the device
*SAV Saves the current settings to memory
*SRE Sets the service request enable register bits
*STB Reads the status byte and master summary status bits
*TRG Trigger command
*TST Executes a self-test
*WAI Prevents the device from executing subsequent commands or queries until the No Operation Pending flag becomes true

>top

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

AC power supply  PCR-M seriesAC Power Supply PCR-LE series
Communication Interface Manual

AC power supply  PCR-M seriesAC Power Supply PCR-LE2 series
Communication Interface Manual

AC power supply  PCR-M seriesAC Power Supply PCR-M series
Communication Interface Manual