Overview of commands
Default State
When the PLZ12005WH/PLZ20005WH is switched to the following default states, there are settings whose values are changed.
- *RST command transmission
- *RCL command transmission
- Power on
- Factory default (SYST:SEC:IMM transmission)
The following tables list the values of the settings that change after they have changed.
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| ARB:COUN | 3 | Depends on the settings in memory | Depends on PON setting | 3 | -- |
| COND | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | SIE |
| COND:EXT:FCON | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| COND:PULS:LEV | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | SIE |
| COND:PULS:FREQ | 1.0 | Depends on the settings in memory | Depends on PON setting | 1.0 | HZ |
| COND:PULS:DCYC | 50 | Depends on the settings in memory | Depends on PON setting | 50 | PCT |
| COND:RANG | HIGH | Depends on the settings in memory | Depends on PON setting | HIGH | -- |
| COND:RESP | NORM | Depends on the settings in memory | Depends on PON setting | NORM | -- |
| CURR | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | A |
| CURR:EXT:FCON | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| CURR:EXT:ACON | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| CURR:PULS:LEV | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | A |
| CURR:PULS:DCYC | 50 | Depends on the settings in memory | Depends on PON setting | 50 | PCT |
| CURR:PULS:FREQ | 1.0 | Depends on the settings in memory | Depends on PON setting | 1.0 | Hz |
| CURR:PROT | MAX | Depends on the settings in memory | Depends on PON setting | MAX | A |
| CURR:PROT:STAT | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| CURR:SINE:AMPL | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | A |
| CURR:SINE:FREQ | 1.0 | Depends on the settings in memory | Depends on PON setting | 1.0 | HZ |
| CURR:SLEW | MIN | Depends on the settings in memory | Depends on PON setting | MIN | A/μs |
| CURR:SST | MIN | Depends on the settings in memory | Depends on PON setting | MIN | S |
| FUNC | CC | Depends on the settings in memory | Depends on PON setting | CC | -- |
| FUNC:CVOP | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| POW | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | V |
| POW:EXT:FCON | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| POW:PROT | MAX | Depends on the settings in memory | Depends on PON setting | MAX | W |
| POW:PROT:STAT | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| PROG | ""(No selection) | -- | |||
| VOLT | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | V |
| VOLT:EXT:FCON | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| VOLT:PROT:ACT | LIM | Depends on the settings in memory | Depends on PON setting | LIM | -- |
| VOLT:PROT:LOW | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | V |
| VOLT:PROT:STAT | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| VOLT:RESP | NORM | Depends on the settings in memory | Depends on PON setting | NORM | -- |
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| INP OUTP |
OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| INP:CUTO:CAP OUTP:CUTO:CAP |
0 | Depends on the settings in memory | Depends on PON setting | 0 | A |
| INP:CUTO:CAP:STAT OUTP:CUTO:CAP:STAT |
OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| INP:CUTO:ENER OUTP:CUTO:ENER |
0 | Depends on the settings in memory | Depends on PON setting | 0 | A |
| INP:CUTO:ENER:STAT OUTP:CUTO:ENER:STAT |
OFF | Depends on the settings in memory | Depends on PON setting | OFF | A |
| INP:CUTO:ETIM OUTP:CUTO:ETIM |
0 | Depends on the settings in memory | Depends on PON setting | 0 | A |
| INP:CUTO:ETIM:STAT OUTP:CUTO:ETIM:STAT |
OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| INP:CUTO:VOLT OUTP:CUTO:VOLT |
0 | Depends on the settings in memory | Depends on PON setting | 0 | A |
| INP:CUTO:VOLT:STAT OUTP:CUTO:VOLT:STAT |
OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| INP:EXT:LOG OUTP:EXT:LOG |
POS | Depends on the settings in memory | Depends on PON setting | POS | -- |
| INP:MSYN:ACC OUTP:MSYN:ACC |
OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| INP:PON:STAT OUTP:PON:STAT |
No change | Value at previous POWER off | AUTO | -- | |
| INP:PROT:WDOG OUTP:PROT:WDOG |
No change | Value at previous POWER off | OFF | -- | |
| INP:PROT:WDOG:DEL OUTP:PROT:WDOG:DEL |
No change | Value at previous POWER off | 60 | S | |
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| TRIG:ACQ:COUN | 1 | Depends on the settings in memory | Depends on PON setting | 1 | -- |
| TRIG:ACQ:DEL | 0 | Depends on the settings in memory | Depends on PON setting | 0 | S |
| TRIG:ACQ:SOUR | IMM | Depends on the settings in memory | Depends on PON setting | IMM | -- |
| TRIG:ACQ:INT:STAT | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| TRIG:ACQ:INT:TIME | 0.1 | Depends on the settings in memory | Depends on PON setting | 0.1 | S |
| TRIG:TRAN:DEL | 0.0 | Depends on the settings in memory | Depends on PON setting | 0.0 | S |
| TRIG:TRAN:SOUR | IMM | Depends on the settings in memory | Depends on PON setting | IMM | -- |
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| DATA:BSIZ | 1024 | Depends on the settings in memory | Depends on PON setting | 1024 | -- |
| DATA:FORM | CURR,VOL,POW | Depends on the settings in memory | Depends on PON setting | CURR,VOL,POW | -- |
| DATA:INT:GATE | LOAD ON | Depends on the settings in memory | Depends on PON setting | LOAD ON | -- |
| DATA:INT:GATE:ARES | ON | Depends on the settings in memory | Depends on PON setting | ON | -- |
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| SYST:BEEP | No change | Value at previous POWER off | ON | -- | |
| SYST:BEEP:KEY | No change | Value at previous POWER off | ON | -- | |
| SYST:BEEP:PROT | No change | Value at previous POWER off | ON | -- | |
| SYST:BEEP:SCPI | No change | Value at previous POWER off | ON | -- | |
| SYST:COMM:RLST | No change | LOCal | -- | ||
| SYST:CONF:DIGITAL2:DIR | No change | Value at previous POWER off | INP | -- | |
| SYST:CONF:RSEN | No change | Value at previous POWER off | OFF | -- | |
| SYST:KLOC | No change | Value at previous POWER off | OFF | -- | |
| SYST:KLOC:LEV | No change | Value at previous POWER off | 3 | -- | |
| SYST:PASS:NEW | No change | Value at previous POWER off | "" | -- | |
| SYST:SSAV | No change | Value at previous POWER off | OFF | -- | |
| SYST:SSAV:DEL | No change | Value at previous POWER off | 60 | S | |
| SYST:TZON | No change | No change | UTC | -- | |
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| STAT:OPER:ENAB | No change | 0 | -- | ||
| STAT:OPER:PTR | No change | 32767 | -- | ||
| STAT:OPER:NTR | No change | 0 | -- | ||
| STAT:QUES:ENAB | No change | 0 | -- | ||
| STAT:QUES:PTR | No change | 32767 | -- | ||
| STAT:QUES:NTR | No change | 0 | -- | ||
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| DISP:ETIM | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| DISP:CAP | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| DISP:ENER | OFF | Depends on the settings in memory | Depends on PON setting | OFF | -- |
| SENS:APER | 0.1 | Depends on the settings in memory | Depends on PON setting | 0.1 | S |
| Setting item | Value | Unit | |||
|---|---|---|---|---|---|
| *RST | *RCL | Power on | Factory default | ||
| *ESE | No change | Depends on PSC setting | 0 | -- | |
| *PSC | No change | Value at previous POWER off | ON | -- | |
| *SRE | No change | Depends on PSC setting | 0 | -- | |
Electronic Load PLZ12005WH/PLZ20005WH