Command (function search)
Setting the Protection Function and Clearing the Alarm
Overcurrent protection (OCP)
| CURR:PROT | Sets the current in OCP |
|---|---|
| CURR:PROT:STAT | Sets the operation of the PLZ12005WH/PLZ20005WH when OCP is activated |
Overpower protection (OPP)
| POW:PROT | Sets the power in OPP |
|---|---|
| POW:PROT:STAT | Sets the operation of the PLZ12005WH/PLZ20005WH when OPP is activated |
Undervoltage protection (UVP)
| VOLT:PROT:LOW | Sets the voltage of UVP |
|---|---|
| VOLT:PROT:STAT | Enables/disables UVP |
| VOLT:PROT:ACT | Sets the operation of the PLZ12005WH/PLZ20005WH when UVP is activated |
Overcurrent protection (OCP) during program operation
| PROG:CURR:PROT | Sets the current value of OCP for program operation |
|---|---|
| PROG:CURR:PROT:STAT PROG:CURR:PROT:ACT | Sets how the PLZ12005WH/PLZ20005WH operates when OCP is activated during program operation |
Overpower protection (OPP) during program operation
| PROG:POW:PROT | Sets the power value of OPP for program operation |
|---|---|
| PROG:POW:PROT:STAT PROG:POW:PROT:ACT |
Sets how the PLZ12005WH/PLZ20005WH operates when OPP is activated during program operation |
Undervoltage protection (UVP) for program operation
| PROG:VOLT:PROT:LOW | Sets the voltage value of UVP for program operation |
|---|---|
| PROG:VOLT:PROT:STAT | Enables or disables UVP for program operation |
| PROG:VOLT:PROT:ACT | Sets how the PLZ12005WH/PLZ20005WH operates when UVP is activated during program operation |
Clears alarms
| INP:PROT:CLE OUTP:PROT:CLE |
Clears alarms |
|---|
Electronic Load PLZ12005WH/PLZ20005WH