INPut
OUTPut
Sets the load on/off. Only when load is set to on, the duration to keep the load turned on can be specified.
Command
INPut[:STATe] {ON|OFF|1|0}[,{<numeric>|MINimum|MAXimum}]
OUTPut[:STATe] {ON|OFF|1|0}[,{<numeric>|MINimum|MAXimum}]
INPut[:STATe]?
OUTPut[:STATe]?
Parameter 1 {ON|OFF|1|0}
| Value | ON(1) | Load on |
|---|---|---|
| OFF(0) | Load off | |
| *RST transmission | OFF(0) |
Parameter 2 {<numeric>|MINimum|MAXimum}
If parameter 1 is set to ON (1), specify the duration to keep the load turned on. When the duration passes, the load turns off. When omitted, the load does not turn off based on the elapsed time.
| Value | 1 to 3600000 |
|---|---|
| Unit | S |
Response
Returns the load on/off state in boolean format in response to the INP? or OUTP? query.
Electronic Load PLZ12005WH/PLZ20005WH