Command (Sub-system search)
TRIGger subsystem
| ABOR | Stops all the trigger functions |
|---|---|
| ABOR:ACQ | Stops the measurement trigger function |
| ABOR:SINE | Stops the sine function |
| ABOR:TRAN | Stops the sequence trigger function |
| ABOR:PULS | Stops the pulse function |
| INIT:ACQ | Switches to measurement trigger wait state |
| INIT:SINE | Executes the sine function |
| INIT:TRAN:PROG | Switches to the sequence trigger wait state in the program selected by PROG |
| INIT:PULS | Executes the pulse function |
| TRIG:ACQ:COUN | Sets the number of times measurement values are to be recorded |
| TRIG:ACQ:DEL | Sets the delay time for applying measurement triggers |
| TRIG:ACQ:MSYN | Starts measurement simultaneously on synchronized PLZ12005WH/PLZ20005WHs |
| TRIG:ACQ:SOUR | Sets the measurement trigger source |
| TRIG:ACQ:INT:STAT | Sets whether to measure at intervals when TRIG:ACQ:COUN is 2 or higher |
| TRIG:ACQ:INT:TIME | Sets the measurement interval time when TRIG:ACQ:INT:STAT is set to ON |
| TRIG:TRAN:DEL | Sets the delay time for applying sequence triggers |
| TRIG:TRAN:EXEC? | Queries the execution state of the sequence trigger function and the pulse function |
| TRIG:TRAN:MSYN | Starts a sequence simultaneously on synchronized PLZ12005WH/PLZ20005WHs |
| TRIG:TRAN:RES | Resumes a sequence that has been paused |
| TRIG:TRAN:SOUR | Sets the sequence start trigger source |
| TRIG:TRAN:SUSP | Pauses a sequence that is being executed |
Electronic Load PLZ12005WH/PLZ20005WH