CURR:SINE:FREQ
Sets the frequency of the sine function.
Command
[SOURce:]CURRent[:LEVel]:SINE:FREQuency {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent[:LEVel]:SINE:FREQuency? [{MINimum|MAXimum}]
Parameter
| Setting range | 1 to 1k, 2k, 5k, 10k | ||
|---|---|---|---|
| Resolution | 1 to 10 | 1 | |
| 20 to 100 | 10 | ||
| 200 to 1000 | 100 | ||
| Unit | Hz | ||
| *RST transmission | 1 |
Response
Returns the frequency of the sine function in NR3 format in response to the CURR:SINE:FREQ? query.
(Reference) The period resolution ⊿T is set to 20 [μs] in the device. The response returns the inverse of the period set in the device. For example, if you specify 900 Hz, 1120 [μs] is set in the device. The response in this situation will be 892.86Hz.
Electronic Load PLZ12005WH/PLZ20005WH