CURR:PULS:DCYC
Sets the pulse duty cycle.
This frequency is used in common for CURRent and CONDuctance pulse.
Command
[SOURce:]CURRent[:LEVel]:PULSe:DCYCle {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent[:LEVel]:PULSe:DCYCle? [{MINimum|MAXimum}]
Parameter
| Duty cycle setting range, step |
1Hz to 10Hz | 5.0 to 95.0, 0.1 step |
|---|---|---|
| 11Hz to 100Hz | ||
| 110Hz to 1000Hz | ||
| 1.1kHz to 10.0kHz | 5 to 95, 1 step | |
| Unit | % | |
| *RST transmission | 50 |
Response
Returns the pulse duty cycle in NR3 format in response to the CURR:PULS:DCYC? query.
Electronic Load PLZ12005WH/PLZ20005WH