VOLT:RANG
Sets the voltage range.
If the voltage range is switched, the VOLT:TRIG and VOLT:OFFS:TRIG settings are cleared, and ABOR is applied to all SEQuence groups. Command
This command is not valid when the output is on (OUTP ON).
Command
[SOURce:]VOLTage:RANGe[:UPPer] {<numeric>|MINimum|MAXimum}
[SOURce:]VOLTage:RANGe[:UPPer]? [{MINimum|MAXimum}]
Parameter
| Value | 135 | 135V range (default) |
| 270 | 270V range |
| Value | 150 | L range (default) |
| 300 | H range |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the voltage range setting in NR3 format in response to VOLT:RANG?.
AC Power Supply PCR-LE series