OUTP
Turns the output on and off.
Command
OUTPut[:STATe] {ON|OFF|1|0}
OUTPut[:STATe]?
Parameter
| Value | ON(1) | Output on |
| OFF(0) | Output off (default) |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns whether the output is on in NR1 format in response to OUTP?.
AC Power Supply PCR-LE series