*RCL
Aborts the measurement operation and reads the contents stored in memory.
For the commands that are affected, see this table.
When recalling a memory with the output turned on, a SCPI error (-102,"Operation denied while in OUTPut ON state") occurs if the output mode or voltage range switches.
Command
*RCL <NR1>
Parameter
| Value | 1 | Memory A |
| 2 | Memory B | |
| 3 | Memory C | |
| 4 to 10 | Memoru No. (When the optional board is installed) | |
| A SCPI error (-222, "Data out of range") occurs if outside the range. | ||
AC Power Supply PCR-LE series