VOLT:RANG:AUTO
Sets AUTO function of the voltage range.
If the AUTO function is switched, the VOLT:TRIG and VOLT:OFFS:TRIG settings are cleared, and ABOR is applied to all SEQuence groups.
Command
[SOURce:]VOLTage:RANGe:AUTO {ON|OFF|1|0}
[SOURce:]VOLTage:RANGe:AUTO?
Parameter
| Value | ON(1) | Enable the AUTO function |
| OFF(0) | Disable the AUTO function (default) |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the voltage range setting in NR1 format in response to VOLT:RANG:AUTO?.
AC Power Supply PCR-LE series