SIM:T5:CYCL:STAT
Sets whether the duration that the PCR remains in the returned state is configured in terms of time or in terms of cycles for power line abnormality simulations.
When you have selected time, use SIM:T5:TIME to set the return time.
When you have selected cycles, use SIM:T5:CYCLE to set the number of return cycles.
Command
SIMulation:T5:CYCLe:STATe {ON|OFF|1|0}
SIMulation:T5:CYCLe:STATe?
Parameter
| Value | ON(1) | The value is set in terms of cycles. |
| OFF(0) | The value is set in terms of time (default). |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the returned state setting in NR1 format in response to SIM:T5:CYCL:STAT?.
AC Power Supply PCR-LE series