SIM:T5:CYCL
Sets the number of return cycles of power line abnormality simulations.
This command is valid when the duration that the PCR remains in the returned state is configured to be set in terms of cycles (SIM:T5:CYCL:STAT ON).
Command
SIMulation:T5:CYCLe[:LEVel] {<numeric>|MINimum|MAXimum}
SIMulation:T5:CYCLe[:LEVel]? [{MINimum|MAXimum}]
Parameter
| Value | 0 to 999900 (0 by default) |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the return cycles in NR3 format in response to SIM:T5:CYCL?.
AC Power Supply PCR-LE series