SIM:T1:TIME
Sets the voltage regulation starting time of power line abnormality simulations.
This command is valid when voltage regulations are configured to be set by time (SIM:T1:PHAS:STAT OFF).
Command
SIMulation:T1:TIME[:LEVel] {<numeric>|MINimum|MAXimum}
SIMulation:T1:TIME[:LEVel]? [{MINimum|MAXimum}]
Parameter
| Value | 0.0 to 999.9m (100m by default) |
| Unit | S |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the voltage regulation starting time in NR3 format in response to SIM:T1:TIME?.
AC Power Supply PCR-LE series