OUTP:COUP
Sets the output mode.
This command is not valid when the output is on (OUTP ON).
Command
OUTPut:COUPling {AC|DC|ACDC|EAC|EDC}
OUTPut:COUPling?
Parameter
| Value | AC | AC mode (default) |
| DC | DC mode | |
| ACDC | AC+DC mode This mode is available on the PCR-LE/PCR-LE2 at all times. It is available on the PCR-M when the appropriate optional interface board is installed. |
|
| EAC | EXT-AC PCR-M (when the analog interface board is installed) only |
|
| EDC | EXT-DC PCR-M (when the analog interface board is installed) only |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the output mode in char format in response to OUTP:COUP?.
AC Power Supply PCR-LE series