FREQ:SYNC
Sets the synchronization function.
This is valid in AC mode and AC+DC mode (OUTP:COUP AC|ACDC).
If the EX05-PCR-LE is in use (optional) and the signal source is set to external signal source (FUNC:SOUR EXT), this command is invalid.
Use FREQ:SYNC:PHASE:DEL to set the synchronization delay phase angle.
Command
[SOURce:]FREQuency:SYNChronous[:STATe] {ON|OFF|1|0}
[SOURce:]FREQuency:SYNChronous[:STATe]?
Parameter
| Value | ON(1) | The synchronization function is enabled. |
| OFF(0) | The synchronization function is disabled (default). |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the synchronization function in NR1 format in response to FREQ:SYNC?.
AC Power Supply PCR-LE series