FREQ:LIM:LOW
Sets the lower limit value of frequency.
This is valid in AC mode and AC+DC mode (OUTP:COUP AC|ACDC).
If the EX05-PCR-LE is in use (optional) and the signal source is set to external signal source (FUNC:SOUR EXT), this command is invalid.
Command
[SOURce:]FREQuency:LIMit:LOWer {<numeric>|MINimum|MAXimum}
[SOURce:]FREQuency:LIMit:LOWer? [{MINimum|MAXimum}]
Parameter
| Value | 40 to 500 (40 by default) | 1 to 999.9 (1 by default) |
| Unit | HZ |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the lower limit value of frequency in NR3 format in response to FREQ:LIM:LOW?.
AC Power Supply PCR-LE series