FREQ
Set the AC output frequency.
This is valid in AC mode and AC+DC mode (OUTP:COUP AC|ACDC).
If the EX05-PCR-LE is in use (optional) and the signal source is set to external signal source (FUNC:SOUR EXT), this command is invalid.
Command
[SOURce:]FREQuency[:CC|IMMediate] {<numeric>|MINimum|MAXimum}
[SOURce:]FREQuency[:CC|IMMediate]? [{MINimum|MAXimum}]
Parameter
| Value | 40 to 500 (60 by default) | 1 to 999.9 (50 by default) |
| Unit | HZ |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the AC output frequency in NR3 format in response to FREQ?.
AC Power Supply PCR-LE series