CURR:PROT:TRIP:TIME
Sets the time that must elapse before the output is turned off when the current limit is exceeded.
The action that is performed when the limit is exceeded is valid when TRIP (CURR:PROT:STAT ON) has been selected.
Command
[SOURce:]CURRent:PROTection:TRIP:TIME {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent:PROTection:TRIP:TIME? [{MINimum|MAXimum}]
Parameter
| Value | 0 to 10 (10 by default) |
| Unit | S |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the time that must elapse before the output is turned off when the current limit is exceeded in NR3 format in response to CURR:PROT:TRIP:TIME?.
AC Power Supply PCR-LE series