TRIG:SEQ2:PHAS/ TRIG:SYNC:PHAS
Sets the phase angle of the OUTPUT on phase control.
Command
TRIGger:SEQuence2:PHASe[:ON] {<numeric>|MINimum|MAXimum}
TRIGger:SEQuence2:PHASe[:ON]? [{MINimum|MAXimum}]
Parameter
| Value | 0 to 359 |
| Unit | DEG |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the phase angle of the OUTPUT on phase control in NR3 format in response to TRIG:SEQ2:PHAS?.
AC Power Supply PCR-LE series