SYST:CONF:TIME
Sets the time.
Also set the date (using SYST:CONF:DATE).
The time and date are used in the timestamps of files saved to USB memory devices.
If the power is left off for two to three weeks, the time is set to 00:00:00.
Command
SYSTem:CONFigure:TIME <hour_NR1>,<min_NR1>,<sec_NR1>
SYSTem:CONFigure:TIME?
Parameter <hour_NR1>
| Value | 0 to 23 | Hour |
Parameter <min_NR1>
| Value | 1 to 59 | Minute |
Parameter <sec_NR1>
| Value | 1 to 59 | Second |
Response
Returns the time as a sequence of values in NR1 format (in the order hour, minute, second) in response to SYST:CONF:TIME?.
AC Power Supply PCR-LE series