MEM:SAV
Stores the following settings in memory.
| AC mode | DC mode | AC+DC mode | |
|---|---|---|---|
| Frequency | Yes | No | Yes |
| AC voltage*1 | Yes | No | Yes |
| DC voltage*2 | No | Yes | Yes |
| Wave bank No. | Yes | No | Yes |
*1: During single-phase, three-wire output and three-phase output (optional), phase voltages are stored.
*2: During single-phase, three-wire output (optional), phase voltages are stored.
If the EX05-PCR-LE is in use (optional) and the signal source is set to external signal source (FUNC:SOUR EXT), this command is invalid.
Command
MEMory:SAV <NR1>
Parameter
| Value | 1 to 99 | Memory No. |
AC Power Supply PCR-LE series