AC Power Supply PCR-LE series

AC Power Supply PCR-LE2 series

AC Power Supply PCR-M series

Commnunication Interface Mannual

 

DISP:PHAS

Selects the phase that you want to display.

This command is valid in single-phase three-wire output or three-phase output (PCR-LE optional).

Command

DISPlay:PHASe {0|1|2|3}

DISPlay:PHASe?

Parameter

Value 0 All phases are displayed (default).
  1 The U phase is displayed.
  2 The V phase is displayed.
  3 The W phase is displayed (three-phase output only).

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

Response

Response

Returns the displayed phase in NR1 format in response to DISP:PHAS?.

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

AC power supply PCR-M seriesAC Power Supply PCR-LE series
Communication Interface Manual

AC power supply PCR-M seriesAC Power Supply PCR-LE2 series
Communication Interface Manual

AC power supply PCR-M seriesAC Power Supply PCR-M series
Communication Interface Manual