PROG:CURR:PROT:STAT
Sets the operation to be performed when overcurrent protection (OCP) is activated in the program selected by PROG. (PROG:CURR:PROT:ACT alias)
Command
[SOURce:]PROGram[:SELected]:CURRent:PROTection:STATe {ON|OFF|1|0}
[SOURce:]PROGram[:SELected]:CURRent:PROTection:STATe?
Parameter
| Value | ON(1) | Load off (Trip) |
|---|---|---|
| OFF(0) | Limit output (Limit) | |
| Factory default | OFF(0) |
Response
Returns the operation to be performed when OCP in the selected program is activated in boolean format in response to the PROG:CURR:PROT:STAT? query.
Electronic Load PLZ12005WH/PLZ20005WH