ARB:MAP

Sets the voltage and current values for the specified parts (point index) of the I-V characteristics map.

To reflect this setting in the output, send ARB:APPL.

Command

[SOURce:]ARBitrary[:LEVel][:IMMediate]:MAP <inded>, <voltage>, <current>

[SOURce:]ARBitrary[:LEVel][:IMMediate]:MAP? <index>

Parameter <index>

Specifies the point index of the I-V characteristics map

Point index 1 is fixed to 0 V, 0 A.
The voltage of the point index of the value specified by ARB:COUN is fixed to 808.00 V.
If you try to change it, an error is returned.

Parameter <voltage>

Specifies the voltage (Unit: V)

Parameter <current>

Specifies the current (Unit: A)

Example

ARB:MAP 1, 5.0V, 1.0A

Response

Returns the voltage and current values for the specified point index in the NR3 format in response to ARB:MAP?.