Command (Sub-system)
SOURce subsystem
CURR | Sets the current. |
---|---|
CURR:EXT:SOUR | Sets the constant current control mode. |
CURR:FINE | Sets the fine adjustment setting for current (Only on the PAT350-22.8T and PAT850-9.4T). |
CURR:LIM | Queries the current setting limit. |
CURR:LIM:AUTO | Enables/Disables the current setting limit. |
CURR:PROT | Sets the OCP. |
CURR:TRIG | Target current using a trigger. |
VOLT | Sets the voltage. |
VOLT:EXT:SOUR | Sets the CV control mode setting. |
VOLT:FINE | Sets the fine adjustment setting for voltage. (Only on the PAT350-22.8T and PAT850-9.4T) |
VOLT:LIM | Queries the voltage limit setting. |
VOLT:LIM:AUTO | Enables/Disables the voltage limit setting. |
VOLT:PROT | Sets the OVP. |
VOLT:TRIG | Target voltage using a trigger. |