Command (Sub-system)
TRIGger subsystem
ABOR | Aborts the operation of all sequences. |
---|---|
INIT:NAME | Sequence 1, 2, and 3: Starts the trigger function. |
INIT | Sequence 1: Starts the voltage/current setting trigger function. |
INIT:SEQ2 | Sequence 2: Starts the output on/off delay trigger function. |
INIT:SEQ3 | Sequence 3: Starts the measurement trigger function. |
INIT:CONT:NAME | Sequence 3: Sets the auto continue mode. |
INIT:CONT:SEQ3 | Sequence 3: Sets the auto continue mode. |
TRIG | Sequence 1: Software trigger. |
TRIG:SOUR | Sequence 1: Trigger source. |
TRIG:OUTP | Sequence 2: Software trigger. |
TRIG:OUTP:DEL:ON | Sequence 2: Sets the output on delay. |
TRIG:OUTP:DEL:OFF | Sequence 2: Sets the output off delay. |
TRIG:OUTP:SOUR | Sequence 2: Trigger source. |
TRIG:SEQ2 | Sequence 2: Software trigger. |
TRIG:SEQ2:DEL:ON | Sequence 2: Sets the output on delay. |
TRIG:SEQ2:DEL:OFF | Sequence 2: Sets the output off delay. |
TRIG:SEQ2:SOUR | Sequence 2: Trigger source. |
TRIG:ACQ | Sequence 3: Software trigger. |
TRIG:ACQ:SOUR | Sequence 3: Trigger source. |
TRIG:SEQ3 | Sequence 3: Software trigger. |
TRIG:SEQ3:SOUR | Sequence 3: Trigger source. |