CURR:PROT
Sets the overcurrent protection (OCP) value.
Command
[SOURce:]CURRent:PROTection[:LEVel] {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent:PROTection[:LEVel]? [{MINimum|MAXimum}]
Parameter
| Value | 10 % to 111.5 % of the rated output current (The default value is 111.5 % of the rated output current.) |
| Unit | A |
For the setting that is applied when *RST is sent, see Table.
Response
Returns the OCP value in the NR3 form in response to CURR:PROT?.