Command (Function)
Setting Changes using triggers
Second level node: SEQuence[1] or TRANsient
The same operation is carried out regardless of the node that is used.
| VOLT:TRIG | Target voltage using a trigger. |
|---|---|
| CURR:TRIG | Target current using a trigger. |
| TRIG:SOUR | Sequence 1: Trigger source. |
| INIT | Sequence 1: Starts the voltage/current setting trigger function. |
| INIT:NAME | Starts the trigger function. |
| TRIG | Sequence 1: Software trigger. |
| ABOR | Aborts the operation of all sequences. |