Command (Function)
Measurement
Second level node: SEQuence3 or ACQuire
The same operation is carried out regardless of the node that is used.
| TRIG:SEQ3:SOUR TRIG:ACQ:SOUR |
Sequence 3: Trigger source. |
|---|---|
| INIT:SEQ3 | Sequence 3: Starts the measurement trigger function. |
| INIT:NAME | Starts the trigger function. |
| TRIG:SEQ3 TRIG:ACQ |
Sequence 3: Software trigger. |
| INIT:CONT:SEQ3 INIT:CONT:NAME |
Sets the auto continue mode. |
| SENS:AVER:CLE | Clears the measured date. |
| FETC:VOLT | Queries the measured voltage output without starting the measurement operation. |
| MEAS:VOLT | Queries the measured voltage output after starting a new measurement operation. |
| FETC:CURR | Queries the measured current output without starting the measurement operation. |
| MEAS:CURR | Queries the measured current output after starting a new measurement operation. |
| ABOR | Aborts the operation of all sequences. |