CURR:EXT:SOUR
Sets the constant current control mode. This cannot be set when the output is on.
Command
[SOURce:]CURRent:EXTernal:SOURce {NONE|VOLTage|RESistance|IRESistance|FVOLtage}
[SOURce:]CURRent:EXTernal:SOURce?
Parameter
| Value | NONE | Panel control (default) |
| VOLTage | External voltage control | |
| RESistance | External resistance control 10 kW -> MAX OUT | |
| IRESistance | External resistance control 10 kW -> 0 OUT (FAIL SAFE) | |
| FVOLtage | External voltage control(FAST) |
For the setting that is applied when *RST is sent, see Table.
Note: FVOL parameter is available for 8 kW type products only.
Response
Returns the constant current control mode as character data in response to CURR:EXT:SOUR?.