VOLT:PROT
Sets the overvoltage protection (OVP).
Command
[SOURce:]VOLTage:PROTection[:LEVel] {<numeric>|MINimum|MAXimum}
[SOURce:]VOLTage:PROTection[:LEVel]? [{MINimum|MAXimum}]
Parameter
Value | 10 % to 111.5 % of the rated output voltage (The default value is 111.5 % of the rated output voltage.) |
Unit | V |
For the setting that is applied when *RST is sent, see Table.
Response
Returns the OVP value in the NR3 form in response to VOLT:PROT?.