VOLT
Sets the voltage.
Command
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] {<numeric>|MINimum|MAXimum}
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]? [{MINimum|MAXimum}]
Parameter
| Value | 0 % to 105 % of the rated output voltage(The default value is 0 % of the rated output voltage.)
|
| Unit | V |
For the setting that is applied when *RST is sent, see Table.
Response
Returns the voltage setting in the NR3 form in response to VOLT?. If the voltage value is set using external input, the specified voltage is returned.