CURR
Sets the current.
Command
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude]? [{MINimum|MAXimum}]
Parameter
Value | 0 % to 105 % of the rated output current (The default value is 105 % of the rated output current.) An SCPI error (-221, "Settings conflict") occurs if CURR:EXT:SOUR is not set to NONE. |
Unit | A |
For the setting that is applied when *RST is sent, see Table.
Response
Returns the current setting in the NR3 form in response to CURR?. If the current value is set using external input, the specified current is returned.