Command (Function)
Measurement and Trigger
Trigger function ->Tutotial
| COND:TRIG | Set the conductance when a trigger is activated |
|---|---|
| CURR:TRIG | Set the current when a trigger is activated |
| INP:TRIG OUTP:TRIG |
Turns ON/OFF the load when a trigger is activated |
| INIT | Initiates the trigger function |
| INIT:CONT | Sets whether to continue the trigger wait status |
| *TRG | Software trigger |
| ABOR | Aborts the trigger function |
Measurement function
| MEAS:CURR | Reads the measured current |
|---|---|
| MEAS:POW | Reads the measured power |
| MEAS:VOLT | Reads the measured voltage |
| MEAS:ETIM | Reads the elapsed time of measurement |