INP
OUTP
Turns ON/OFF the load.
Command
INPut[:STATe][:IMMediate] {ON|OFF|1|0}
OUTPut[:STATe][:IMMediate] {ON|OFF|1|0}
INPut[:STATe][:IMMediate]?
OUTPut[:STATe][:IMMediate]?
Parameter
| Value | ON (1) | Load on |
| OFF (0) | Load off (default) |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the load on/off status in the NR1 form in response to INP?/OUTP?