INIT:CONT
Sets whether to continue the trigger wait status.
When ON is specified, the PLZ-4W/PLZ-4WL/PLZ-4WH transits from idle to trigger wait status. Then, even when a trigger is activated, the PLZ-4W/PLZ-4WL/PLZ-4WH does not automatically return to idle.
Command
INITiate:CONTinuous {ON|OFF|1|0}
INITiate:CONTinuous?
Parameter
| Value | ON (1) | Auto continue mode on |
| OFF (0) | Auto continue mode off (default) |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns on/off status of the auto continue mode in the NR1 form in response to INIT:CONT?