Command (Function/ Sub-system)
IEEE488.2 Common Command
*CLS | Clear the status data structure |
---|---|
*ESE | Set the event status enable register bits |
*ESR | Query the event status register |
*IDN | Query the identification string (manufacturer information) |
*OPC | Cause the device to generate the operation complete message in the event status register when all pending selected device operations have been finished. |
*RCL | Recall the contents saved to the memory |
*RST | Perform a device reset. Configures the PLZ-4W/PLZ-4WL/PLZ-4WH to a known condition independent from the usage history of the device |
*SAV | Save the current settings to the memory |
*SRE | Set the service request enable register bits |
*STB | Read the status byte and master summary status bits |
*TRG | Trigger command |
*TST | Execute the self-test |
*WAI | Prevent the device from executing subsequent commands or queries until the No Operation Pending flag becomes true |