PULS:PER
Set the pulse period.
Command
[SOURce:]PULSe:PERiod {<numeric>|MINimum|MAXimum}
[SOURce:]PULSe:PERiod?
Parameter
Value | PLZ-4W: 50 to 1 PLZ-4WL: 20 to 1 PLZ-4WH: 250µ to 1 |
Unit | S |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the pulse period in the NR3 form in response to PULS:PER?