PULS:LEV:PERC:CURR
Set the current level in terms of a percentage of the setting.
Command
[SOURce:]PULSe:LEVel:PERCentage:CURRent {<numeric>|MINimum|MAXimum}
[SOURce:]PULSe:LEVel:PERCentage:CURRent?
Parameter
| Value | 0.0 to 100.0 |
| Resolution | 0.1 |
| Unit | PCT |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the current level in the NR3 form in response to PULS:LEV:PERC:CURR?