PULS:LEV:PERC:COND
Set the conductance level in terms of a percentage of the setting.
Command
[SOURce:]PULSe:LEVel:PERCentage:CONDuctance {<numeric>|MINimum|MAXimum}
[SOURce:]PULSe:LEVel:PERCentage:CONDuctance?
Parameter
Value | 0.0 to 100.0 |
Resolution | 0.1 |
Unit | PCT |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the conductance level in the NR3 form in response to PULS:LEV:PERC:COND?