PULS:LEV:CURR

Set the current level.

Command

[SOURce:]PULSe:LEVel[:VALue]:CURRent {<numeric>|MINimum|MAXimum}

[SOURce:]PULSe:LEVel[:VALue]:CURRent?

Parameter  PLZ-4W   PLZ-4WL/ PLZ-4WH

Table shows the setting that is specified when *RST or *RCL is sent.

Response

Returns the current level in the NR3 form in response to PULS:LEV:CURR?