PULS:LEV:COND
Set the conductance level.
Command
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] {<numeric>|MINimum|MAXimum}
[SOURce:]PULSe:LEVel[:VALue]:CONDuctance?
Parameter PLZ-4W PLZ-4WL/ PLZ-4WH
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the conductance level in the NR3 form in response to PULS:LEV:COND?.