PULS:FREQ
Set the pulse frequency.
Command
[SOURce:]PULSe:FREQuency {<numeric>|MINimum|MAXimum}
[SOURce:]PULSe:FREQuency?
Parameter
Value | PLZ-4W: 1 to 20k PLZ-4WL: 1 to 50k PLZ-4WH: 1 to 4k |
Resolution | 1 to 10: 0.1 11 to 100: 1 110 to 1k: 10 1.1k to 50k: 100 |
Unit | HZ |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the pulse frequency in the NR3 form in response to PULS:FREQ?