PULS:DCYC
Set the switching duty cycle.
Command
[SOURce:]PULSe:DCYCle {<numeric>|MINimum|MAXimum}
[SOURce:]PULSe:DCYCle?
Parameter
Value | 5 to 95 |
Resolution | PLZ-4W/PLZ-4WH: 0.1 PLZ-4WL: 1 |
Unit | PCT |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the switching duty cycle in the NR3 form in response to PULS:DCYC?