PROG:LVAL
Set the setting value after the specified program ends.
Command
PROGram[:SELected]:LVALue {<numeric>|MINimum|MAXimum}
PROGram[:SELected]:LVALue ]?
Parameter
Setting for conductance value PLZ-4W PLZ-4WL/ PLZ-4WH
Setting for current value PLZ-4W PLZ-4WL/ PLZ-4WH
Setting for voltage value (Nomal sequence only)
Setting for power value (Nomal sequence only)
Response
Returns the setting value in the NR3 form in response to PROG:LVAL?.