PROG:LINP
PROG:LOUT
Set the load on/off condition after the sequence ends.
Command
PROGram[:SELected]:LINPut {ON|OFF|1|0}
PROGram[:SELected]:LOUTput {OFF|ON}
PROGram[:SELected]:LINPut?
PROGram[:SELected]:LOUTput?
Parameter
Value | ON (1) | Load on after the sequence ends |
OFF (0) | Load off after the sequence ends |
Response
Returns the load on/off condition after the sequence ends in the NR1 form in response to PROG:LINP/PROG:LOUT?