POW:PROT:ACT
Sets whether to turn off the load or limit the power when the OPP trips.
Command
[SOURce:]POWer:PROTection:ACTion {LIMit|TRIP}
[SOURce:]POWer:PROTection:ACTion?
Parameter
Value | LIMit | Limit the current when the OPP trips. (default) |
TRIP | Turn off the load when the OPP trips. |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the OPP operation setting in the CHAR form in response to POW:PROT:ACT?