POW:PROT
Set the overpower protection.
Command
[SOURce:]POWer:PROTection[:LEVel][:OVER] {<value>|MINimum|MAXimum}
[SOURce:]POWer:PROTection[:LEVel][:OVER]?
Parameter
Value | PLZ164W PLZ164WA PLZ164WL PLZ164WH |
0.1 to 181.5 |
PLZ334W PLZ334WL PLZ334WH |
0.3 to 363 | |
PLZ664WA | 0.6 to 726 | |
PLZ1004W PLZ1004WH |
1.0 to 100 | |
Resolution | 100m | |
Unit: | W |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the overpower protection setting in the NR3 form in response to POW:PROT?